The Mantis 2 H2O jacket is made of polyester and leather and falls into Revit’s adventure sports category. The jacket is designed for the summer rider who wants guarantee in changeable weather conditions. Sizes range from small to three times XL and the Revit jacket is available in four different colour combinations.
Materials
The first material we cover is the cowhide used on the top of the shoulders and back of the sleeves. The cowhide leather provides freedom of movement and wear resistance. The second material used is polyester. However, there are three different types that are used. The first type of polyester is 600D Hexagonal. The 600D refers to the quality of the material, with 600 being the highest and 300 the lowest. Hexagonal refers to the hexagonal shape of the material. This type of polyester is located on the chest and sleeves. The second variation of polyester is almost the same as the first, the only difference being the shape. This polyester is located on the back, around the collar and lower back. The last variant of polyester is stretchy. A characteristic of polyester is that it does not shrink, wrinkle or deform. Now that we have dealt with polyester, there are two materials left, the most important of which is perhaps ventilation. Polyester does not breathe very well, so the ventilation of the jacket is very important. The jacket has a total of five different ventilation panels. These are incorporated in the area around the chest, abdomen, lower and upper back and upper arms. The panels consist of a specially developed 3D mesh, which keeps you very cool in warm weather. Under the ventilation panel on the lower back is a piece of laminated reflection material. The last thing to pay attention to is the waterproofing of the Revit motorcycle jacket. Just like the other 2022 jackets, this too is a waterproof motorcycle jacket. A good inner jacket keeps your underwear protected from water. The inner jacket also serves as a windbreaker, making this jacket suitable for the cooler mornings and warm afternoons.
Protection
The shoulders and elbows are well protected by the SEEFLEX Level 2 protection. These are like pads around the elbows and shoulder blades. The pads feel soft, but are able to withstand heavy impact and unintentional movement. During the production of the jacket, SEESOFT protection around the chest and back was taken into account. This means that space has been kept free for inserts. However, the SEESOFT protection must be purchased separately. The characteristics of SEESOFT are almost the same as those of SEEFLEX, they feel soft but can withstand heavy impact and unintentional movements. The safety seams contribute to the wear resistance of the jacket. The seams do not run everywhere, however, but mainly in the areas with a higher risk of impact. This construction ensures that the outer material always stays together when it comes into contact with, for example, asphalt.
Comfort
The piece of comfort that stands out is the easily removable waterproof inner lining. When you don’t expect rain, you can remove the inner jacket within ten seconds. This makes the Mantis 2 H2O even cooler and thus an air-vented motorcycle jacket. The inner lining not only plays a waterproofing role, but also a thermal lining and wind blocker. We also see parts of polyester on the side, which ensure a smooth freedom of movement.





Reviews
There are no reviews yet.